Edgewater Networks 4300T Bedienungsanleitung PDF herunterladen (Seite 18)

Local Area Network (LAN) Architecture

Page 18 of 51

Network 3.1 - VLAN switch, integrated EdgeMarc firewall

Implementation Steps

1) VLAN Configuration (Screenshot #4b)(Configure VLANs prior to enabling them)

a. Set LAN Port 1 to 802.1q framing.

b. Set LAN Ports 2, 3 and 4 to 802.1 framing.

c. Use VLAN 1 as Voice VLAN:

i. Assign IP Address: 192.168.1.1 with mask 255.255.255.0

d. Add a VLAN for Data with:ID: 500

i. Assign IP address: 192.168.50.1 with mask 255.255.255.0

e. Add a VLAN for Management with:ID: 600 (optional)

i. Assign IP address: 192.168.60.1 with mask 255.255.255.0

f. Associate VLAN 1 with LAN ports 1 and 4

g. Associate VLANs 500 and 600 with LAN port 1

h. When done, the VLAN screen should appear like image #4b

2) Enable Network (

Make sure your configuration PC is plugged into port 4)

a. WAN-Interface Static IP address X.X.X.X/X.X.X.X (see screenshot #3

)

b. If T1, WAN-Interface T1 (see screenshot #5

)

c. Select Enable VLAN checkbox

3) Upgrade firmware to

VOIP2320 spec (see screenshot #15a, 15b, 15c

)

4) Enable DHCP on VLANs 1 and 500 (screenshot #12

)

5) Enable Firewall (screenshot #13

)

6) Enable NAT (screenshot #6

)

7) Enable Traffic Shaping (screenshot #10

)

8) Enable VOIP ALG functionality Main Screen (screenshot #8

)

a. Specify VLAN 1 for the ALG

9) Enable ALG functionality, SIP Settings (screenshot #9

)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 50 51

Keine Kommentare

Edgewater Networks 4300T Bedienungsanleitung Seite 18