Edgewater Networks 4300T Bedienungsanleitung PDF herunterladen (Seite 16)

Local Area Network (LAN) Architecture

Page 16 of 51

Network 2.1 - Flat LANs, integrated EdgeMarc firewall w/DMZ

Configuration Steps

1) VLAN Configuration (see screenshot #4a). (Configure VLANs prior to enabling them)

a) Set the four LAN ports to 802.1

b) Modify VLAN 1 as:

i) IP address: 192.168.1.1 with mask 255.255.255.0

ii) Assign to Physical LAN ports: 1, 2 and 4

c) Add a VLAN with: ID: 2

i) IP address: 192.168.2.1 with mask 255.255.255.0

ii) Associate VLAN 2 with physical LAN port 3

2) Enable Network (

Make sure your configuration PC is plugged into one of ports 1, 2 or 4)

a) If T1, WAN-Interface T1 (see screenshot #5

)

b) WAN-Interface Static IP address X.X.X.X/X.X.X.X (see screenshot #3

)

c) Set Default Gateway & DNS IP addresses

d) Select Enable VLAN checkbox

3) Upgrade firmware to

VOIP2320 spec (see screenshot #15a, 15b, 15c

)

4) Enable DHCP on VLAN 1 (see screenshot #12

)

5) Enable Firewall (see screenshot #13

)

6) Enable NAT (see screenshot #6

)

7) Enable Traffic Shaping (see screenshot #10

)

8) Enable VOIP ALG functionality (see screenshot #8

)

a) Specify VLAN 1 for the ALG

9) Enable ALG functionality, SIP Settings (see screenshot #9

)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 50 51

Keine Kommentare

Edgewater Networks 4300T Bedienungsanleitung Seite 16